news

Essential things in industrial production of plastic products

Update:14-04-2021
Summary:

Injection mold is a necessary thing in the industrial p […]

Injection mold is a necessary thing in the industrial production of plastic products. It generally consists of 7 systems including pouring system, guiding system, forming system, core pulling system, ejection system, cooling system and exhaust system. The planning of injection molds is a very important link in the production of molds.China European standard mold Manufacturers
In the planning process, the requirements are summarized. After considering all aspects of the product, the planned product can reach the production demand. So what are the key requirements for the injection mold planning? Product wall thickness All plastics have a certain wall thickness scale, generally 0.5~4mm. When the wall thickness exceeds 4mm, it will cause the cooling time to be too long, shrinking and other problems, so you should consider changing the product structure.

  The uneven wall thickness will cause the appearance to shrink. Uneven wall thickness will cause pores and weld marks. Reasonable use of stiffeners can increase product rigidity and reduce deformation. The thickness of the ribs must be ≤ (0.5~0.7) T product wall thickness, otherwise it will cause the appearance to shrink. The single-sided slope of the stiffener should be greater than 1.5° to prevent top damage.

   Too small rounded corners may cause stress buildup in the product and cause cracks in the product. Too small rounded corners may cause stress in the mold cavity to build up, leading to cavity cracking. Setting a reasonable fillet can also improve the processing technology of the mold. For example, the cavity can be directly milled with an R cutter to prevent low-efficiency electrical processing.